Summer Garden Silicone Mould

This silicone mould is perfect for making your own soaps, solid shampoos, candles, massage stones or even air fresheners, allowing you to combine your choice of scents, colours and textures. Versatile and food-safe, it can also be used in the kitchen.

A few ideas

This mould is perfect for making:

• Gentle face and body soaps

• Melt & pour soaps

• Nourishing soaps

• Gentle face and body soaps

• Solid shampoos

• Shower bars

• Massage stones

• Local application treatment patches

• Candles

• Deodorant blocks (zen, mosquito repellent, etc.)

• Modeling clay for children

• Pastries & flans

With its three original floral-themed shapes, creating your recipes becomes a true pleasure and a fun activity to share with children and friends.

This versatile mould can also be used in the kitchen to make flans or delightful multi-shape cakes.

Quality

This silicone mould was chosen after extensive testing and a rigorous selection process to guarantee you the best quality at the best price. This model was chosen based on several criteria.

Material

Silicone

Silicone is a material that distributes heat evenly, requires no greasing, and is non-stick, making it easy to remove from the mould. It is particularly insulating and resistant to extreme temperatures (from -60°C to +260°C). Silicone is unbreakable, non-deformable, and wear-resistant. In addition, it prevents the formation or deposit of residues, which facilitates cleaning.

Capacity

• Heart flower: 1 x 125 g

• Bee flower: 1 x 125 g

• Star flower: 1 x 115 g

Dimensions

Complete plate: 27.6 cm x 17.2 cm

• Heart flower: Diameter 7.4 cm

• Bee flower: Diameter 7.5 cm

• Star flower: Diameter 7.4 cm

Colour

Plum

Instructions for use

1. Method for melt & pour soaps, remelted soaps, solid shampoos, candles, and pebbles:

• Pour the mixture of your choice into the mould.

• Leave the mixture to harden on a flat surface for at least 2 hours at room temperature or 30 minutes in the refrigerator.

• Remove from the mould by gently turning the mould over onto a flat, clean, dry surface and applying light pressure to the back of the cavity to extract the soap, solid shampoo, candle, or pebble.

2. Method for cold process soaps:

• Pour the soap paste of your choice into the mould.

• Cover the mould with plastic wrap, then add a bath towel or blanket on top to keep them warm.

• Leave the covered soaps to harden for 24 to 48 hours at room temperature.

• Wearing protective gloves, remove them from the mould by gently turning the mould over onto a flat, clean, dry surface and applying light pressure to the back of the cavity to extract the soap.

• Leave the soaps to dry in a dry, well-ventilated place away from light for at least 4 weeks before use.

• For more information, see our "Cold saponification" know-how sheet The "Cold saponification" Info Sheet.

Aroma-zone's tip

The Summer Garden mould allows you to make four soaps with a 450 g Melt & Pour base.

Cleaning

Before using for the first time, it is recommended to wash the silicone mould with a sponge and mild detergent.

For cosmetic use:

• Immerse the mould in warm, clear water and scrub the inside of the cavities with a sponge. When making soap, there is no need to add any detergent as the cavities will already be impregnated with it.

• Rinse the mould under running warm water.

Caution: It is not recommended to clean the mould in the dishwasher after making cosmetics, as the presence of soap inside the cavities would cause excessive foaming and could damage your dishwasher.

For culinary use:

• Allow the mould to cool after removing it from the oven.

• The mould can be cleaned in the dishwasher or by hand by immersing it in clear hot water and scrubbing the inside of the cavities with a sponge and mild detergent. Rinse the mould with clear, lukewarm water.

Disinfection

• Spray the mould with 60° or 70° alcohol.

• Rub it with a soft, clean, dry cloth to remove any residue.

• Leave it to dry in the open air.