Square Crazy Cakes Silicone Mould

This silicone mold is perfect for making a wide range of homemade products.

Cosmetics:

• Soaps

• Shampoo bars

• Deep conditioners

• Massage stones

Culinary:

• Savory and sweet cakes

• Flans

• Meringues

Decoration:

• Air freshener blocks

Create your own recipes and make a multitude of soaps with this sturdy, practical, and easy-to-use silicone mold. This mold will make making your own soaps a breeze! You can even share this fun activity with your loved ones, including the youngest members of your family. This versatile, food-grade silicone mold can be used to bake delicious cakes, create solid cosmetics recipes, make air fresheners for your home, and more. Discover a wide selection of silicone soap molds in our Aroma-Zone range to vary your creations and let your imagination run wild!

Material

Silicone

Silicone is a material that distributes heat evenly, requires no greasing, and is non-stick, making it easy to remove from the mold. It is particularly insulating and resistant to extreme temperatures (from -40°C to +200°C). Silicone is unbreakable, non-deformable, and wear-resistant. In addition, it prevents the formation or deposit of residues, making it easy to clean.

Color

Plum

Dimensions

• Complete sheet: approximately 29.5 cm x 17 cm

• Soap: approx. ∅ 7.2 cm

• Soap weight: approx. 100 g

Instructions for use

1. Method for melt & pour soaps, remelted soaps, solid shampoos, candles, and pebbles:

• Pour the mixture of your choice into the mold.

• Leave the mixture to harden on a flat surface for at least 2 hours at room temperature or 30 minutes in the refrigerator.

• Remove from the mold by gently turning the mold over onto a flat, clean, dry surface and applying light pressure to the back of the cavity to extract the soap, solid shampoo, candle, or pebble.

2. Method for cold process soaps:

Tip: Before you begin, oil the mold to ensure the best results. 

• Pour the soap paste of your choice into the mold.

• Cover the mold with plastic wrap, then place a towel or blanket over it to keep it warm.

• Leave the covered soaps to harden for 24 to 48 hours at room temperature.

• Wearing protective gloves, remove them from the mold by gently turning the mold over onto a flat, clean, dry surface and applying light pressure to the back of the cavity to extract the soap.

• Leave the soaps to dry in a dry, well-ventilated place away from light for at least 4 weeks before use.

For more information, see our "Cold saponification" know-how sheet by clicking here.

Cleaning

Before first use, it is advisable to wash the silicone mold with a sponge and mild detergent.

For cosmetic use:

• Immerse the mold in hot water and scrub the inside of the cavities with a sponge. When making soap, it will not be necessary to add any detergent as the cavities will already be impregnated with it.

• Rinse the mold under warm running water.

Caution : It is not recommended to clean the mold in the dishwasher after making cosmetics, as the presence of soap inside the cavities would cause excessive foaming and could damage your dishwasher.

For culinary use:

• Allow the mold to cool after removing it from the oven.

• The mold can be cleaned in the dishwasher or by hand by immersing it in hot water and scrubbing the inside of the cavities with a sponge and mild detergent.

• Rinse the mold with lukewarm water.

Disinfection

• Spray the mold with 60° or 70° alcohol.

• Rub it with a soft, clean, dry cloth to remove any residue.

• Leave to dry in the open air.