Silicone Doughnut Mould

This silicone mould is perfect for making a wide range of homemade products.

Cosmetics:

• Soaps

• Bar shampoos

• Deep conditioners

• Massage bars

• Bath pebbles

• Bath melts

Culinary:

• Savoury and sweet cakes

• Baked doughnuts

• American doughnuts

• Muffins

Decoration:

• Air freshener blocks

Create your own recipes and make a multitude of soaps with this flexible, practical, and easy-to-use silicone mould. This mould will make making your own soaps a breeze! You can share this fun activity with your loved ones, even the youngest ones. Versatile, this food-grade silicone mould allows you to prepare delicious cakes, create recipes for solid cosmetics, and make cakes, create recipes for solid cosmetics, make air freshener blocks for the home, and more.

Material

Silicone

Silicone is a material that distributes heat evenly, requires no greasing, and is non-stick, making it easy to remove from the mould. It is particularly insulating and resistant to extreme temperatures (from -40°C to +200°C). Silicone is unbreakable, non-deformable, and wear-resistant. In addition, it prevents the formation or deposit of residues, which makes cleaning easier.

Colour

Plum

Dimensions

• Mould: Diameter 7.5 cm x h 2.9 cm

• Soap: Diameter 7 cm x h 2.5 cm

• Soap weight: approximately 80 g

Instructions for use

Method for melt & pour soaps, remelted soaps, solid shampoos, candles, and pebbles:

• Pour the mixture of your choice into the mould.

• Leave the mixture to harden on a flat surface for at least 2 hours at room temperature or 30 minutes in the refrigerator.

• Remove from the mould by gently turning the mould over onto a flat, clean, dry surface and applying light pressure to the back of the cavity to extract the soap, solid shampoo, candle, or pebble.

Cleaning

Before first use, it is recommended to wash the silicone mould with a sponge and mild detergent.

For cosmetic use:

• Immerse the mould in hot water and scrub the inside of the cavities with a sponge. When making soap, it will not be necessary to add any detergent as the cavities will already be impregnated with it.

• Rinse the mould under warm running water.

Caution: It is not recommended to clean the mould in the dishwasher after making cosmetics, as the presence of soap inside the cavities would cause excessive foaming and could damage your dishwasher.

For culinary use:

• Allow the mould to cool after removing it from the oven.

• The mould can be cleaned in the dishwasher or by hand by immersing it in hot water and scrubbing the inside of the cavities with a sponge and mild detergent. 

• Rinse the mould with warm water.

Disinfection

• Spray the mould with 60° or 70° alcohol.

• Rub it with a soft, clean, dry cloth to remove any residue.

• Leave it to dry in the open air.