Alhambra Magic Silicone Mould

This silicone mold is perfect for making a wide range of homemade products.

Cosmetics:

• Soaps

• Shampoo bars

• Deep conditioners

• Massage bars

• Bath pebbles

• Bath melts

Culinary:

• Savory and sweet cakes

• Flans

• Meringues

Create your own recipes and make a multitude of soaps with this sturdy, practical, and easy-to-use silicone mold. This mold will make soap making a breeze! You can even share this fun activity with your loved ones, even the youngest ones. Versatile, this food-grade silicone mold will allow you to bake delicious cakes and create solid cosmetic recipes. Find a wide selection of silicone soap molds in our Aroma-Zone range to vary your creations and dare to be bold!

Material

Silicone: Silicone is a material that distributes heat evenly, requires no greasing, and is non-stick, making it easy to remove from the mold. It is particularly insulating and resistant to extreme temperatures (from -40°C to +200°C). Silicone is unbreakable, non-deformable, and wear-resistant. In addition, it prevents the formation or deposit of residues, making it easy to clean.

Dimensions

• Mold: L 3.2 in x W 3 in x H 1.4 in

• Soap: approx. L 6.4 cm x W 6.4 cm

• Soap weight: approx. 90 g

Color

Plum

Instructions for use

1. Method for melt & pour soaps, re-melted soaps, solid shampoos, candles, and pebbles:

• Pour the mixture of your choice into the mold.

• Leave the mixture to harden on a flat surface for at least 2 hours at room temperature or 30 minutes in the refrigerator.

• Remove from the mold by gently turning the mold over onto a flat, clean, dry surface and applying light pressure to the back of the cavity to extract the soap, solid shampoo, candle, or pebble.

Tip: Use a pipette to precisely pour your colored soap paste into the different patterns of the mold. 

2. Method for cold process soaps:

Tip: Before you start, oil the mold to ensure the best results.

• Pour the soap paste of your choice into the mold.

• Cover the mold with plastic wrap, then add a bath towel or blanket on top to keep it warm.

• Leave the covered soaps to harden for 24 to 48 hours at room temperature.

• Wearing protective gloves, remove them from the mold by gently turning the mold over onto a flat, clean, dry surface and applying light pressure to the back of the cavity to extract the soap.

• Leave the soaps to dry in a dry, well-ventilated place away from light for at least 4 weeks before use.

• For more information, see our Know-how sheet "Cold saponification" by clicking here.

Cleaning

Before first use, it is advisable to wash the silicone mold with a sponge and mild detergent.

For cosmetic use:

• Immerse the mold in hot water and scrub the inside of the cavities with a sponge. When making soap, there is no need to add any detergent as the cavities will already be impregnated with it.

• Rinse the mold under warm running water.

Caution: It is not recommended to clean the mold in the dishwasher after making cosmetics, as the presence of soap inside the cavities would cause excessive foaming and could damage your dishwasher.

For culinary use:

• Allow the mold to cool after removing it from the oven.

• The mold can be cleaned in the dishwasher or by hand by immersing it in hot water and scrubbing the inside of the cavities with a sponge and mild detergent. Rinse the mold with lukewarm water.

Disinfection

• Spray the mold with 60° or 70° alcohol.

• Wipe it with a soft, clean, dry cloth to remove any residue.

• Leave to dry in the open air.